Turning The Terastation On And Off; Changing The Administrator Password - Buffalo TeraStation 1000 User Manual

11
Power Connector
Use the included power cable to connect to a surge protector or outlet.
Note: Disconnecting the AC cable from the TeraStation, even if it is not powered on, may cause the TeraStation's
time to become incorrect.
12
Power Status LED
The LED glows green when the power cable is connected.
13
Fan
Spins to avoid overheating inside. Do not block the fan.
14
Anti-Theft Security Slot (
Use this slot to secure your TeraStation with a cable lock (not included).
15
Not in use.
16
UID Button
Press the UID button on the front or the back of the unit to turn the blue UID LED on or off.
17
UID LED
This LED turns on or off whenever the UID button is pressed. The LED glows blue when on.
18
Info LED
If there is a status message, the info LED will glow amber.
19
Error LED
If there is an error, the error LED will glow red.

Turning the TeraStation On and Off

For TS1200D models, move the power switch on the back of the TeraStation to the "on" position to turn it on. To turn
it off, move the switch to the "off" position and wait for the unit to fully shut down before unplugging it.
For TS1400D and TS1400R models, press the power button on the TeraStation to turn it on. To turn off the
TeraStation, hold down the power button until the TeraStation beeps twice. The power LED will flash as the unit
shuts down. You can also shut down or restart the TeraStation remotely from Settings.
Never unplug the AC adapter without properly shutting down the TeraStation first.
When all the LEDs on the front of the TeraStation turn off, the shutdown process is complete.

Changing the Administrator Password

After initial setup, follow this procedure to change your password.
1
Double-click the
)
icon to start NAS Navigator2.
8