Step 1 - Replacing A Hard Drive - Buffalo TeraStation 1000 User Manual

• To avoid damaging the TeraStation with static electricity, ground yourself by touching something made of metal
before handling any sensitive electronic parts.
• After a drive is replaced, it will take about 30 minutes before normal file reading and writing are restored. Settings
may not be accessible during this period.
• Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
• If a new drive is not recognized after installing it, click Rediscover Disk in Settings.
• For TS1400D models, do not replace 2 or more drives at the same time with new drives while the TeraStation is
on. If you do, it may cause unexpected behavior.

Step 1 - Replacing a Hard Drive

Instructions for TS1200D and TS1400D Models
1
Squeeze the left side of the front panel and pull the panel off.
TS1200D
2
D IS K
1
D IS K
TS1400D
48