Replication; Preparing A Replication Destination - Buffalo TeraStation 1000 User Manual

9
Select the backup destination and click OK.
10
Click OK. Jobs added to "Backup List" are displayed.
11
Click Close.

Replication

Replication copies all data from a share to a share on a different TeraStation. This is an easy way to configure a
reliable system to provide data protection in the event your main TeraStation fails. To configure replication, connect
an Ethernet cable to the LAN port of each TeraStation and follow the steps below.
Notes:
• For best results, use static IP addresses for both replication TeraStations (source and destination). These IP
addresses should be the same network segment.
• Replication source data is copied to the replication destination folder with a differential overwrite. Any data that
is not in the replication source will be overwritten.

Preparing a Replication Destination

First, configure a folder as a replication destination.
1
In Settings, click File Sharing.
2
Click to the right of "Folder Setup".
67