Table of Contents
Advertisement
On the Activation page, enter the Cisco OnPlus Portal
S
3
TEP
Activation ID.
This ID is assigned by the Cisco OnPlus Portal when the customer
site is created.
The Activation ID is displayed on the Customer > Profile page on
the Cisco OnPlus Portal. Prior to activation, the Activation ID is also
displayed on the Customer > Status page on the
Cisco OnPlus Portal.
If required, you can change the default network settings for IP
S
4
TEP
addressing and DHCP nameservers.
To assign a static IP address to the OnPlus Network Agent, follow
these steps.
a.
On the Activation page, click Configure additional network
settings.
b. Choose Static for the IP Address. When you choose Static, the
page updates to display additional IP address configuration
settings.
c.
Enter the IP address that you want to use for the
OnPlus Network Agent.
d. Enter the network mask and gateway IP address for your
network.
e. In the DNS fields, enter the IP address of up to three
nameservers. You must enter at least one DNS server IP
address.
f.
Click Apply network settings.
g. Click the link provided to access the OnPlus Network Agent at
its new IP address.
If the link fails to load, the new network address may not be
reachable with your computer's current network configuration.
Follow the onscreen instructions to resolve the problem.
10
Cisco ON100 Network Agent Quick Start Guide
Advertisement
Table of Contents
