Playing Back Submasters Sequentially - Philips 64331 Operation Manual

Operations Manual
To change pages, hold down the SUBMASTER button. The LCD screen will show the following:
The display in the lower left window shows that the console is on Page 1 (P:01) and that there are 24 pages available.
To select a different page the Flash buttons 1 to 24 are used (1 to 12 on the 12/24 version). To select Submaster Page
4 you would select the Flash button 4 while holding down the SUBMASTER button.
While the SUBMASTER button is held down the light in the currently select Submaster page will be lit. Submaster
pages that have Submasters recorded on them will flash.
If a Submaster is currently outputting and the page is changed it will continue to output and the flash button for that
Submaster will flash. Once the Submaster has been lowered to 0% it will change pages and be available for use on the
newly selected page.

Playing Back Submasters Sequentially

It is possible to play back the recorded Submasters on a page sequentially using the PRESET A and PRESET B
MASTER faders. This allows you to playback recorded Submasters as a theatrical style cue stack. The sequence will
start with the first recorded memory and end with the last recorded memory on that page before cycling back to the
first memory.
Note: Any Submasters that have no values stored in them will be ignored in the sequence.
To access this function ensure that the PRESET A and PRESET B MASTER faders are at the bottom ( PRESET A
MASTER at 0 and PRESET B FADER at 10).Press the NEXT button, it will turn blue to show you have selected
Sequential Submaster Playback.
The Flash button of the first recorded fader will flash yellow. Raise the PRESET A and PRESET B faders to the
top. The first recorded Submaster will output. Its flash button will turn solid yellow. The next sequential Submaster's
flash button will flash yellow. Lower the PRESET A and PRESET B FADERS to the bottom. This will select the
next memory.
There are three ways to exit the sequential playback:
1) Move PRESET A MASTER to 0% if it is at Full (top) or move PRESET B MASTER to 0% if it is at Full
(bottom). This will fade the last Submaster that was outputting to 0%. The NEXT button's blue light will go
out.
2) Press the NEXT button. This will snap the last outputting Submaster to 0%. The NEXT button's blue light
will go out.
3) You can fade into Single Scene or Two Scene Mode. Select Single Scene for instance, it will turn yellow.
Set the channel faders to the values that you require. If the PRESET A and PRESET B MASTERS are at
the bottom, move them to the top. If they are at the top you will need to move them to the bottom and then
back to the top. This will fade in the values that you have set on the channel faders.
Example:
1) Record a variety of channel levels into Submasters 1, 5, 9, 15, 20, 21 and 22.
2 0
CONSOLE BASIC OPERATION
Submaster Mode
Menu
Release
01:
13:
25:
DMX Base
37:
FX
P:01 Select 1 - 24
Figure 14: Submaster Mode - LCD Display
A
Assign Fade
Fade
B
A
Fade
C
B
D