Listening to your system
1
Make sure you have set the playback
source to the proper output setting.
For example, you might need to set your DVD
player to output multichannel analog audio.
2
Press DVD/LD .
3
Press SIGNAL SELECT to select the
multichannel analog inputs.
DVD 5.1ch shows in the display and the
ANALOG indicator lights.
Selecting the front audio inputs
When playing back a component connected to
the MCACC / AUDIO IN jack on the front panel,
set the source to F.AUDIO on the receiver.
1
Press F.AUDIO (SHIFT+DVD) on the
remote control.
You can also select the source by pressing
VIDEO/FRONT AUDIO on the front panel.
2
Playback the connected component.
05
35
En