Selecting The Multichannel Analog Inputs; Selecting The Front Audio Inputs - Pioneer VSX-917V Operating Instructions Manual

05 Listening to your system
• DIGITAL – Selects an optical or coaxial
digital signal.
When set to DIGITAL or AUTO, 2 DIGITAL
lights when a Dolby Digital signal is input, and
DTS lights when a DTS signal is input.
Selecting the multichannel
analog inputs
If you have connected a decoder or a DVD
player with multichannel analog outputs to this
receiver (page 14), you must select the analog
multichannel inputs for surround sound.
1 Make sure you have set the playback
source to the proper output setting.
For example, you might need to set your DVD
player to output multichannel analog audio.
2 Press DVD/LD.
3 Press SIGNAL SELECT to select the
multichannel analog inputs.
DVD 5.1ch shows in the display and the
ANALOG indicator lights.

Selecting the front audio inputs

When playing back a component connected to
the MCACC/AUDIO IN jack on the front panel,
set the source to F.AUDIO on the receiver.
1 Press F.AUDIO (SHIFT+DVD) on the
remote control.
You can also select the source by pressing
VIDEO/FRONT AUDIO on the front panel.
2 Playback the connected component.
Note
1 • During playback from the multichannel inputs, you can't use any of the sound features/modes and only the volume and chan-
nel levels can be set.
• You can't listen to your speaker B (Second Zone) system during playback from the multichannel inputs.
34
En
1