Using The Sr+ Mode With A Pioneer Plasma; Display - Pioneer VSX-917V-S/-K Operating Instructions Manual

Other connections
• Use a 3-ringed miniplug SR+ cable
connect the CONTROL IN jack of this receiver
with the CONTROL OUT of your plasma

display.

Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
SR+ Setup for Pioneer plasma displays on
page 65 for detailed instructions.
VIDEO
Pioneer plasma
INPUT 1
display
DVD player
DVD
AUDIO IN
PHASE
CONTROL
PHASE ACOUSTIC AUTO SURR/
CONTROL EQ DIRECT DVD/LD TV/SAT DVR / VCR VIDEO/FRONT AUDIO
SOUND MIDNIGHT/ SB ch
RETRIEVER LOUDNESS PROCESSING TONE
STANDBY / ON
PHONES
SIGNAL TUNING/ TUNER
SPEAKERS SELECT STATION EDIT SETUP RETURN
MULTI JOG
This receiver
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
Note
1 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed
mini phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-
play remote sensor to control the receiver. In this case, you won't be able to control the receiver using the remote control if you
switch the plasma display off.
2 The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 65.
1
to
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
VSX-917V
MULTI JOG
ENTER
DIGITAL PRECISION
PROCESSING
STEREO/ ADVANCED
CD CD-R / TAPE / MD USB FM AM AUX F.S.SURR STANDARD SURROUND
LISTENING MODE
MASTER
VOLUME
VIDEO INPUT
USB MCACC/
VIDEO L AUDIO R DIGITAL IN AUDIO IN
DOWN UP
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
plasma display.
• Automatic volume muting on the plasma
2
display.
See also SR+ Setup for Pioneer plasma
displays on page 65 for more on setting up the
receiver.
RECEIVER INPUT
SOURCE
SELECT
F.AUDIO
TV DVR TV CTRL
DVD
CD-R/TAPE USB
CD FM AM RECEIVER
1 Make sure that the plasma display and
this receiver are switched on and that they
are connected with the SR+ cable.
See Using this receiver with a Pioneer plasma
display above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER , then the SR+ button.
The front panel display shows SR+ ON or OFF.
SLEEP SB ch ANALOG
ATT
SR+ DIMMER MIDNIGHT
SIGNAL SEL
D.ACCESS CLASS
+10
DISC
ENTER
TOP MENU MENU
TUNE
ST ST T.EDIT
11
61
En