Pioneer PDP-501MX Technical Manual page 67

2) Integrator Mode
Variable Range
Adjustment Median Value in
Parentheses
CONTRAST
0 to (128) to 255
BRIGHT
0 to (128) to 255
COLOUR
0 to (64) to 127
TINT 0 to (64) to 127
SHARP
0 to (128) to 255
DETAIL 0 to (128) to 255
H. POSITION 0 to (128) to 255 Note 1
V. POSITION 0 to (128) to 255 Note 1
CLK FREQ. 64 to (128) to 192
CLK PHASE
0 to (8) to 16
R HIGH
0 to (128) to 255
G HIGH
0 to (128) to 255
B HIGH
0 to (128) to 255
R LOW
0 to (128) to 255
G LOW
0 to (128) to 255
B LOW 0 to (128) to 255
SIDE MASK R 0 to (128) to 255
SIDE MASK G 0 to (128) to 255
SIDE MASK B 0 to (128) to 255
COLOUR MODE 1/2
BAUD RATE 1200 to 19200 Note 2
MIRROR MODE
OFF/XY
STD-RGB
OFF/ON
Note 1: The one-step increment may vary, depending on input signal and screen size. The range of adjustment values
is also bounded (a limiter is inserted).
Note 2: Switchable in five steps.
* For RS-232C adjustment mode, refer to "5.3.3 List of RS-232C Commands."
INPUT 1 INPUT 2
VIDEO VIDEO
COMPOSITE COMPO-
/S-Video NENT
Before Beginning Adjustments
INPUT 3
VIDEO PC
COMPO- RGB RGB COMPO-
NENT
NENT
INPUT 4
VIDEO PC
RGB RGB
67