Pioneer PDP-501MX Technical Manual page 65

3) About Screen Size
1 Screen size when video signals are received: Refer to the operating manual.
2 Screen size when PC signals are received:
• ORIGINAL
Images are reproduced with the input signal's dot and
line numbers corresponding to the unit's dot and line num-
bers at a 1-to-1 ratio. "dot and line" represents screen
size or display area. Input signals are reproduced with the
highest possible fidelity.
Screen Example:
When inputting a
640 x 480 signal =
• 4:3 NORMAL
Enables reproduction of input signals in full width, pre-
serving the original aspect (vertical-to-horizontal ratio).
Screen Example: When inputting a 640 x 480 signal =
• FULL
Enables reproduction of input signals in full width on a
16-to-9 ratio screen.
Screen Example: When inputting a 640 x 480 signal =
• ZOOM
Enabled only for 1280 x 1024 signals. Reproduction is
made with the input signal's dot and line numbers corre-
sponding to those of the unit at a 1-to-1 ratio, but the top
or the bottom of the image will not be visible, as shown.
(Vertical scrolling is available with "V.POSI." in Menu
mode.)
NOTE: The figures are for illustrative purposes only.
A
Original image
Before Beginning Adjustments
1280 dots
A
Image
reproduced
Screen
640 dots
1280 dots
A
1024 dots
1280 dots
A
1280 dots
A
65