Button Text; Selecting Opening Clip - Pioneer PRV-LX10 Operating Instructions Manual

Button Text

When button text is selected, use the EDIT section
= [DVD Menu] = [Menu Design] = [Button Text]
command to select the format from the following
choices:
Title (chapter) Number/Name
Title (chapter) Number
Title (chapter) Name
No text
When "Name" is selected, the name of the clip
(chapter) allocated to each title will be applied. The
name can be changed during title editing (see page
62, "Title Editing / Chapter Editing").
EDIT section = [DVD Menu] = [Menu Design]
= [Button Text]

Selecting Opening Clip

Using the [DVD Menu] = [Navigation Cmd] =
[Introduction Clip] command on the Function
Menu's EDIT section, you can select the first clip to
be played when a disc is inserted. Also, on the [User
Operation] command, you can select operation
restrictions during playback; if "Disabled" is
selected, all operations during playback of the
opening clip are disabled. If "Enabled" is selected,
the ENTER button is enabled. The actual operation
performed when the ENTER button is pressed
during playback of the opening clip can be selected
with the [Post Cmd] command.
Note 1:
The opening clip must be set to the same TV system
as that on the menu.
Note 2:
The type of audio must be the same for both
opening clip and idle clip.
Note 3:
An opening clip can be set only for HDD projects.
EDIT section = [DVD Menu] = [Navigation Cmd]
= [Introduction Clip]
EDIT section = [DVD Menu] = [Navigation Cmd]
= [User Operation]
DVD Menu Editing
57
PRV-LX10
En