Clip Playback (Hdd); Basic Operations; Prv-Lx10 - Pioneer PRV-LX10 Operating Instructions Manual

Playing Discs

Clip Playback (HDD)

When the "HDD" is designated as the playback
source, the PLAY button on the front panel or
remote control unit is used to playback designated
project clips in the order in which they were
recorded. Press the STOP button on the front panel
or remote control unit to end playback.

Basic Operations

7 Operations on the Menu Screen
Some DVD-Video discs are equipped with menu
(selection screen) functions. To select desired titles
from the menu, use the PRV-LX10's CURSOR
button to select, and the ENTER button to confirm
the selection.
7 To return to the menu screen during playback
TOP
MENU
Press the button.
MENU
Also, if the button is pressed, the menu screen
within the current title will appear.
STOP
REPEAT DISPLAY
RPT A-B
AUDIO
ANGLE SUBTITLE
MENU
TOP
MENU
SETUP
1 2
4 5
7 8
>
0 10
46

PRV-LX10

En
PLAY
PAUSE
STEP
SCAN
PREV NEXT
ENTER
3 RETURN
TITLE/CHP
6
FRM/TIME
9
FRM/TIME
CLEAR
SEARCH
7 To advance to the next chapter/title
Press the main unit's SCAN/SKIP FWD button, or
the remote control unit's
advance immediately to the beginning of the next
chapter or title.
7 To go back to previous chapter/title
Press the main unit's SCAN/SKIP REV button, or
PREV
the remote control unit's
the beginning of the currently playing chapter; press
additional times to return to the beginning of previous
chapters. When multiple titles exist on the disc and
this command is executed within the first chapter of
title, playback will return to the top chapter of the title
immediately preceding the current one.
7 Fast Forward
Hold the main unit's SCAN/SKIP FWD button or the
SCAN
remote control unit's button depressed. Release
the button when you find the desired location.
While the button is depressed, the scan speed will
increase at set intervals, reaching 192x normal speed.
If the remote control unit's
released, fast forward will continue. The scan speed
will change depending on the number of times the
button is pressed. Speed can be changed up to 96x
normal, after which time the speed drops to 6x. When
you find the desired location, press the
7 Fast Reverse
Hold the main unit's SCAN/SKIP REV button or the
SCAN
remote control unit's button depressed. Release
the button when you find the desired location.
While the button is depressed, the reverse scan
speed will increase at set intervals, reaching 192x
normal speed. If the remote control unit's
is pressed and released, fast reverse will continue.
The scan speed will change depending on the
number of times the button is pressed. Speed can
be changed up to 96x normal, after which time the
speed drops to 6x. When you find the desired
PLAY
location, press the button.
Note:
Depending on the disc used, the actual scan speed
may be different from the displayed speed. The speed
may be slower particularly when using angle playback.
NEXT
button; the playback will
button once to return to
SCAN
button is pressed and
PLAY
button.
SCAN
button