Honeywell SPM Flex User Manual page 40

SPM Flex Gas Detector
Security
WARNING
!
Follow local and site procedures when working with the SPM Flex gas
detector� If needed, ensure that the associated control panel is inhibited in
order to prevent false alarms� The following procedures must be followed
carefully and performed only by suitably trained personnel�
When enabled, the detector has five security levels, summarized in this table�
Passcodes are entered at the login menu beginning with the highest level
first (e�g�, set the 4 Admin passcode, then the 3 Power User passcode, then
the 2 Advanced Maintenance passcode, etc�)� Store the Admin passcode in a
secure location; if it is forgotten, the detector's security can be reset only by
a Honeywell Analytics service technician�
Access Rights
Log in/log out
Reset alarms and faults
Review mode
Limited maintenance access
Change Chemcassette (to same type)
Testing
Maintenance
Limited setup
Full setup
Change Chemcassette (to any type)
Security
Program update
Factory service menu (Honeywell personnel only)
40
Security Levels
l l l l l l
l l l l l l
l l l l l l
l l l l l
l l l l l
l l l l
l l l l
l l l l
l l l
l l l
l l
l l
l