Recording Blank Sections - Pioneer PDR-W37 Elite Operating Instructions Manual

8 Recording Other Sources

Recording blank sections

This feature is useful when you want to put some space at the end
of a recording session so that the next recording doesn't start after
the last too closely, but use it wherever you need some blank space
recorded on the disc. Note that you can't start a recording with a
muted section; only after the recording has started, or at the end of
a recording.
1 While recording, or in record-pause
mode, press ¶.
The indicator starts blinking and a blank space of
REC
about four seconds is recorded. The recorder then goes into
record-pause. If you start recording again, a new track is
started.
• If you press and hold ¶,you can record a blank for as long
as you hold down the button.
• Pressing ¶, (without holding) in record-pause mode
records four seconds of silence from the current position.
Use this to create spaces between tracks when recording in
1-track synchro mode, for example.
• It is not possible to record a blank section if the disc was
stopped (not recording) just before you record-paused.
2 To finish the recording session here,
press 7.
• To restart recording, press 6.
42
◊ÛB¿ˆ≤≥
COMPACT DISC RECORDER / MULTI-CD CHANGER
3
- COMPACT DISC MULTI CHANGER
COMPACT DISC DIGITAL RECORDER
REC/
REC MUTE
¶
6 7
CD TEXT Hi-bit Legato Link Conversion