Essages - Kenwood Nexedge Instruction Manual

The
appear when a Status call is received. Press any key to
return to normal operation.
1 Press the key programmed as Stack, or press and hold
the key programmed as Selcall, Status, or Selcall +
Status to enter Stack mode.
• The last received message is displayed.
2 Press
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press
• To delete the selected message, press
the deletion, press
• To delete all messages, press and hold
Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send and receive long messages, you must connect the
transceiver to a PC. Ask your dealer for details.
to the transceiver. GPS data can be manually transmitted by
pressing the key programmed as Send the GPS data, or by
accessing the Menu {page 12}. If set up by your dealer, GPS
data may be automatically transmitted at a preset time interval.
/ to select the desired message.
for 1 second to cycle the display
to return to normal operation.
or .
or #
or # for
or .
19