FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by Kenwood Corporation.
Note: This function is available only in analog operation.
A Selcall is a voice call to a station or group of stations.
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
3 Press
•
If Manual Dialing is enabled, you can directly enter the
station ID using the DTMF keypad.
4 Press the PTT switch and begin your conversation.
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station's ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a group call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in
•
Enter a Fleet number to make a call to all units in the selected
•
Enter an ID number to make a call to the selected ID in all
/
to select the station you want to call.
17