Honeywell CN75e NI Quick Start Manual page 14

Scan a Bar Code
Note: For optimum performance, avoid reflections by scanning
the bar code at a slight angle.
1. Point the computer at the bar code.
2. Touch and hold the Scan button.
3. Center the aiming beam over the
bar code. When the scanner
successfully reads the bar code, the
computer beeps, and the Good
Read LED turns on briefly. The bar
code information is entered into the
application in use.
4. Release the Scan button.
Sync Data
To move files between your CN75/CN75e and a computer:
1. Connect the CN75/CN75e to your computer using a USB
charge/communication accessory.
2. By default, the CN75/CN75e is in USB charging only mode.
To enable file transfers, swipe down from the top of the
Home screen to access the Notifications panel.
3. Touch the USB notification, and then select either File
transfers (MTP) or Photo transfer (PTP).
4. Depending on the Windows® operating system, either open
File Explorer or Windows Explorer.
13