Specifications - Makita BHR261 Instruction Manual

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Switch trigger
5. Lamp
6. Reversing switch lever
7. Quick change chuck for SDS-plus
8. Change cover
9. Change cover line
10. Quick change drill chuck
11. Spindle
12. Rotation with hammering

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
Overall length
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
General Power Tool Safety
Warnings
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
6
Explanation of general view
13. Rotation only
14. Hammering only
15. Grip base
16. Teeth
17. Loosen
18. Tighten
19. Side grip
20. Protrusion
21. Bit shank
22. Bit grease
23. Bit
24. Chuck cover
Model
Concrete
Steel
Wood
-1
)
Net weight
BHR261
363 mm
Save all warnings and
END004-4
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
ENE043-1
1. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
GEA006-2
3. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
25. O symbol
26. Action mode changing knob
27. Depth gauge
28. Dust cup
29. Blow-out bulb
30. Chuck adapter
31. Keyless drill chuck
32. Sleeve
33. Ring
34. Limit mark
35. Brush holder cap
36. Screwdriver
26 mm
13 mm
32 mm
0 - 1,200
0 - 4,800
4.5 kg
D.C. 36 V
BHR261T
387 mm
4.7 kg