Figure 40 Wireless > Security Mode: No Security
The following table describes the labels in this screen.
Table 22 Wireless > Security Mode: No Security
LABEL
Security Mode
Apply
Cancel
10.3.2 WPA-PSK/WPA2-PSK
Select WPA-PSK or WPA2-PSK from the Security Mode list.
Note: WPA-PSK is not available if you enable WPS before you configure WPA-PSK in the
Wireless > Wireless screen.
Chapter 10 Wireless LAN
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the NBG6604.
Click Cancel to reload the previous configuration for this screen.
NBG6604 User's Guide
71