Ap Mode Status Screen - ZyXEL Communications NBG6604 User Manual

6.4 AP Mode Status Screen

Click Status to open the Status screen.
Figure 21 Status > System Status: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 11 Status > System Status: Access Point Mode
LABEL
Device Information
Host Name
Model Number
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
WLAN 2.4G Information
WLAN OP Mode
MAC Address
SSID
Channel
Security
Chapter 6 Access Point Mode
DESCRIPTION
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the model name of your device.
This is the firmware version and the date created.
This is the device mode (Section 4.1.1 on page
Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Client or None.
This is the device mode (Section 4.1.1 on page
set - Access Point Mode.
This shows the 2.4GHz wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the NBG6604 in the 2.4GHz wireless LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG6604 is using.
NBG6604 User's Guide
34
25) to which the NBG6604 is set - AP
25) to which the NBG6604's wireless LAN is