Wireless Screen - ZyXEL Communications NBG6604 User Manual

WPS
WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS
allows you to quickly set up a wireless network with strong security, without having to configure security
settings manually. Depending on the devices in your network, you can either press a button (on the
device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices.
Then, they connect and set up a secure network by themselves. See how to set up a secure wireless
network using WPS in the

10.2 Wireless Screen

Use this screen to configure the SSID and wireless security of the NBG6604's default wireless LAN.
Note: If you are configuring the NBG6604 from a computer connected to the wireless LAN
and you change the NBG6604's SSID, channel or security settings, you will lose your
wireless connection when you press Apply to confirm. You must then change the
wireless settings of your computer to match the NBG6604's new settings.
Click Wireless.
Figure 39 Wireless
The following table describes the general wireless LAN labels in this screen.
Table 21 Wireless
LABEL
Wireless Setup
Band
Chapter 10 Wireless LAN
Section 7.2 on page
DESCRIPTION
Select the frequency band to set whether you want to apply the wireless and security settings
to the default 2.4GHz or 5GHz wireless LAN.
NBG6604 User's Guide
68
38.