Main Assembly 8 (Case Unit); Paper Roll Receive Rollers, Upper Case, Guide Roller, And Switch Panel Assemblies - Casio UP-250 Technical Manual

Main Assembly 8 (Case Unit)

Paper roll receive rollers, upper case, guide roller, and switch panel assemblies

1. The lead wires of the auto-cutter assembly should be arranged as shown in the second part
of the illustration below.
2. Apply G-31 to both of the paper roll receive rollers.
3. Attach the paper roll receive rollers to the lower case.
4. While holding the auto-cutter as shown in the illustration, attach the upper case to the lower
case and secure it with the screws.
5. Apply G-31 to both ends of the guide roller.
6. Attach the guide roller to the upper case.
7. Remove any dust and dirt from the switch panel mounting surface and paste the switch
panel on the upper case.
CPT-B (M3x12)
[0.59 to 0.78 N • m
[6 to 8 kgf • cm)]
Upper case
CPT-B (M3x12)
Switch panel
Apply G-31
— 126 —
Apply G-31
Guide roller
Apply G-31
Paper roll
receiver rollers
Lower case