Start Up The System - Cisco TelePresence MX200 G2 Installation Manual

Installing Cisco TelePresence MX200 G2 - Wall Mount
6

Start up the system

• Connect to power and LAN/Ethernet.
• Switch on the system.
The power switch is placed next to
the power connector at the rear side
of the system.
Wait while the unit starts up. Normally
this takes a few minutes. It may
include automatic software upgrade
and restart of the Touch controller.
• Follow the instructions on the Touch controller.
Cisco Spark: To find more information on how to get started with
Spark registered systems, visit
for Getting Started articles for room systems.
Other services: For further information on set-up and configuration,
download the Getting Started Guide from the Cisco web site,
http://www.cisco.com/go/mx-docs
Never move the camera manually when power is switched on;
always use the camera control function on the Touch controller to
change the camera position.
78-100249-02A0 | JUNE 2016 | © 2016 Cisco Systems, Inc. All rights reserved.
http://help.ciscospark.com and look
EMC Class A declaration
WARNING:
product may cause radio interference in which case the user may be
required to take adequate measures.
此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对其干扰采取切实可行的措施。
WARNING: This is a class A product. In a domestic environment
Power
this product may cause radio interference in which case the user
switch
may be required to take adequate measures.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or
its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to
this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the
property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1110R)
This is a class A product. In a domestic environment this
声 明
Cisco has more than 200 offices worldwide.
Find an overview of the offices on the Cisco web site at
http://www.cisco.com/go/offices
8