Shared Operands - GE D90 Plus Instruction Manual

SHARED OPERANDS

Shared operands
470
Block Trigger
Range: any FlexLogic™ operand
Default: Off
The FlexLogic™ operand assigned to this setting blocks triggering of the disturbance
recorder analog channel.
Figure 395: Analog channel trigger logic
Plus
The EnerVista UR Setup software groups the D90
primary functions. Each function has its own setting parameters and each generates its
own outputs in the form of operands.
• Protection.
• Automation.
• Metering.
• Communications.
• Digital fault recorder (DFR).
• Equipment manager.
• Front panel interface (HMI).
However, it is often desirable for an output from an element within one function can be
available to an element within another function. For instance, it may be useful for the
digital fault recorder to record the output operands of any protection element.
Consequently a fixed, predetermined set of operands is available as to each function as
shown below.
CHAPTER 10: DIGITAL FAULT RECORDER
Plus
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
system into the following seven