Husqvarna 701 Enduro 2017 Owner's Manual page 176

18 SERVICE WORK ON THE ENGINE
–
Insert new oil filter
–
Lubricate the O-ring of the oil filter cover. Position oil filter cover
–
Mount and tighten screws
Guideline
Screw, oil filter cover
–
Fill up with engine oil at the clutch cover.
Engine oil
F00589-10
Info
Too little engine oil or poor-quality engine oil results in premature wear of the
engine.
–
Mount and tighten oil filler plug
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result
in unconsciousness and death.
–
–
–
Start the engine and check that it is oil-tight.
H01066-10
Finishing work
–
Install the engine guard. (
–
Check the engine oil level. (

.

.
1.70 l (1.8 qt.)

with the O-ring.
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the
engine in an enclosed space.
p. 102)
p. 168)

.
M5 6 Nm (4.4 lbf ft)
Engine oil (SAE 10W/50) (
174
p. 201)