Husqvarna 701 Enduro 2017 Owner's Manual page 127

14 WHEELS, TIRES
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease shaft seal rings
Long-life grease (
–
Insert the spacers.
H00935-10
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Operate the hand brake lever several times until the brake linings are seated correctly
against the brake disc.
–
Remove the motorcycle from the lift stand. (
S01058-11
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub

and mating surfaces
p. 203)

.
 .

of the spacers.
M24x1.5 45 Nm (33.2 lbf ft)
p. 77)
M8 15 Nm (11.1 lbf ft)
125