NETGEAR WNHD3004 User Manual page 9
For home theater system
Hide thumbs
Also See for WNHD3004:
- User manual (64 pages) ,
- Datasheet (3 pages) ,
- Install manual (2 pages)
Advertisement
On the Bridge/STA side, the GUI looks very similar, except there is no channel selection but
only "Auto", it will scan all channels and associate with AP on the channel the AP is running.
Network Settings
By default, the devices will run in "DHCP" mode, which means they will get DHCP IPs from the
router.
© 2010 by NETGEAR, Inc. All rights reserved.
Advertisement
