Download Print this page

NETGEAR WNHD3004 User Manual page 10

For home theater system

Hide thumbs Also See for WNHD3004:

You can change the default type to "Static" IP, by default, AP has default IP 192.168.1.240, and

Bridge/STA has default IP 192.168.1.241, you can change the default IPs through this page (a

factory default reset will reset them back to .240 and .241).

MAC Address Filtering

This function is only available on Access Point side, by default, it's disabled. If enabled, it allows

to filter out wireless clients if not on the allowed MAC list, for tightened security.

Table of Contents