Gui Functions - NETGEAR WNHD3004 User Manual

In Auto mode, it will set itself dynamically to AP or Station mode, depending on if it's
wired to a DHCP server/Router.
If set to "Access Point" or "Station", the unit will only run always as AP or STA mode then.

GUI Functions

"Setup Wizard"
On AP side, it includes two functions: Method to add a new wireless client (either WPS, or
manually), and method to set AP's wireless settings.
"Setup Wizard" for STA/Bridge only has one function, to setup its wireless settings to match it on
AP side, either through WPS, or through manual settings.
© 2010 by NETGEAR, Inc. All rights reserved.