Honeywell NEXPTZ-PD Installation And Operation Manual page 10

Simple Function Control Guide
Function
① Press
(95+
② Move Joystick
Menu
or left.
③ Move Joystick
④ Press
or (Enter) button twice.
① Set Preset (direct)
Preset
-.Select one button of
(128) and Press
(Preset) in sequence.
② Running Preset
-.Press Number button and
in sequence.
① Press
Scan
(60+ Preset) at Pelco Protocol
② Press
Joystick
① Press
Tour
(70+ Preset) at Pelco Protocol
② Press
Joystick
① Press
Pattern
(80+ Preset) at Pelco Protocol
② Press
Joystick
Process
(Menu) button.
Preset) at Pelco Protocol
to the right
Up or Down.
(Menu) or ESC (Esc)
1 ~ ,
1 2
(Shift) and
(Scan) button to set.
(Esc) button or move
ESC
to the right or left.
(Tour) button to set.
(Esc) button or move
ESC
to the right or left.
(Pattern) button to set.
~
(Esc) button or move
ESC
to the right or left.
Results
-Menu screen is displayed.
-Go into the sub-menu items.
Change value.
Navigate through the menu items
-Navigate through the menu items.
-Escape from the menu.
-PTZ moves to the position which you
8
have saved the preset.
-PTZ continually moves between the start
and end point which user set among the
preset.
-Escape from the moving Auto Pan.
-PTZ continually moves to user set
position of the presets.
-Escape from the moving Tour.
-PTZ continually moves to user set
position of the presets.
-Escape from the moving Tour.
- 10 -
Remarks
(Enter)
= (94+ Preset)
at Pelco protocol
(Menu)
= (95+ Preset)
at Pelco protocol
(ESC)
= (96+ Preset)
at Pelco protocol
1~59+ Preset to
operate Preset 1~59
at Pelco protocol.
61~68+ Preset to
operate Scan1~8 at
Pelco protocol.
71~74+ Preset to
operate Tour1~4 at
Pelco protocol.
81~84+ Preset to
operate Pattern1~4 at
Pelco protocol.