Viewing A List Of Attached Devices; Upgrading The Router Software - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
WAN Status action buttons are described in
Table 7-2. Connection Status action buttons
Field Description
Set Interval Enter a time and click the button to set the polling frequency.
Stop Click the Stop button to freeze the polling information.

Viewing a List of Attached Devices

The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 7-4: Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.

Upgrading the Router Software

The routing software of the FWG114P Wireless Firewall/Print Server is stored in FLASH memory,
and can be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded
from Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the
binary (.TRX) file before sending it to the router. The upgrade file can be sent to the router using
your browser.
Maintenance
Table 7-2
M-10177-01
7-5