Printer Management; Port Options - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Installation is now complete. You can now print using this printer.
10.
To make changes later, use the Start menu to run this program. The default installation is Start ->
Programs -> NETGEAR Firewall Print Server -> Add Port.

Printer Management

• Using PTP printing, print jobs can be managed in the same manner as any Windows printer.
Open the Printers folder (Start -> Settings -> Printers) and double-click any printer to see the
current print jobs.
• If the printer attached to the firewall is changed, run the Add Port program again and select the
new printer.
• To delete a port created by this setup program, use the Windows Delete Port facility:
Right-click any printer in the Printers folder, and select Properties.
a.
Locate the Delete Port button. This button is on either the Details or Ports tab, depending
b.
on your version of Windows.

Port Options

The options for the Print Port Driver are accessed via the Windows Port Settings button.
Use Start -> Settings -> Printers to open the Printers folder, then right-click the Printer and select
Properties. The Port Settings button is on either the Details or Port tab, depending on your version
of Windows. An example screen is shown below:
Print Server
M-10177-01
6-3