How To Set Up And Test Basic Wireless Connectivity - NETGEAR FWG114P Reference Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Note: If you select shared key, the other devices in the network will not connect unless
they are set to Shared Key as well and have the same keys used in the FWG114P.
• WEP Encryption Keys
For all four 802.11b keys, choose the Key Size. Circle one: 64 or 128 bits
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
Use the procedures described in the following sections to configure the FWG114P. Store this
information in a safe place.

How to Set Up and Test Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
Log in the default LAN address of
1.
default password of password, or using whatever LAN address and password you have set up.
Set the Regulatory Domain correctly.
2.
Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,
3.
enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR.
Note: The characters are case sensitive. An access point always functions in infrastructure
mode. The SSID for any wireless device communicating with the access point must match the
SSID configured in the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P. If
they do not match, you will not get a wireless connection to the FWG114P.
Set the Channel.
4.
It should not be necessary to change the wireless channel unless you notice interference
problems with another nearby wireless router or access point. Select a channel that is not being
used by any other wireless networks within several hundred feet of your wireless firewall/print
server. For more information on the wireless channel frequencies please refer to
Channels" on page
Depending on the types of wireless adapters you have in your computers, choose from the
5.
Mode drop-down list.
Wireless Configuration
http://192.168.0.1
D-7.
M-10177-01
with the default user name of admin and
"Wireless
4-7