Home And Office Set-Up; Temporary Mobile Set-Up - Cobra 29 LX MAX How To Use Manual

Home And Office Set-Up

Base Station Operation
Warning! To operate your transceiver from home or office
you will need a 13.2 volt DC Power Pack rated at a
Do not attempt to operate this
minimum of 2 amps, and a properly installed base
transceiver by connecting it directly
station antenna.
to 120V AC.
Note
For further information call Cobra
Customer Service 1.773.889.3087.
Simply connect the red (+) and black (-)
1
leads of the transceiver to the corresponding
terminals of the power pack.
38
+ —

Temporary Mobile Set-Up

ANT
EXT MIC EXT. PTT EXT.SP.
+POWER–
Plug the power cable into the back of the unit
2
marked "Power". Be sure to observe the polarity
markings.
Connect the properly installed and matched base
3
station antenna.
Temporary Mobile Operation
For temporary mobile operation you may want to
purchase an optional cigarette lighter adapter from
your COBRA dealer. This adapter and a magnetic
mount antenna allow you to quickly "install" your
transceiver for temporary use.
ANT
EXT MIC EXT. PTT EXT.SP.
+POWER–
39