Setting The Count Down Timer - Cobra 29 LX MAX How To Use Manual

Operation
Setting the Alarm
d
Once the alarm settings are complete, rotate the Menu/Enter
knob clockwise to Set Snooze and press Menu/Enter to select.
Note
Default snooze time length 2 3
1.5
CAL
SWR TX
is 10 minutes.
RX
RF
Note
Use Dim/Escape button to
3 5 7 9
1
SIG +30dB
Select the desired snooze time (from 1 to 60 minutes).
exit from any menu back to
Press Enter to save and exit, return to Set Snooze or Alarm
CB standby mode.
SQ DYNAMIKE
Length. Select Alarm Length to set the alarm duration
Note
(from 10 to 300 seconds). Press the Menu/Enter knob save
Default alarm length
and exit.
is 60 seconds and is set in
10 second increments.
MIN

Setting the Count Down Timer

Note
To set the count down timer, press Menu/Enter knob and
Once count down time
select Set Count Down.
is complete, there will be
2 3
1.5
CAL
SWR audio tones for 5 seconds.
TX
RX
RF
3 5 7 9
1
SIG +30dB
Follow the instructions in Setting the Clock section (page
Q DYNAMIKE
17) to set the count down hour and minutes. Once the
desired count down time is selected, press the Menu/Enter
knob again to save and exit.
MIN
Key Tones Mode On and Off
Press the Menu/Enter knob and select Key Tones.
Press the Menu/Enter to set Key Tones On/Off.
NB/ANL
2 3
NB/ANL 1.5
CAL
SWR TX
ANL
RX
S/RF
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
SWR /CAL
Rotate the Menu/Enter knob to select On/Off and press
VOL SQ DYNAMIKE
the Menu/Enter knob to exit to main menu.
OFF MIN
continued
EXIT
SET SNOOZE
ALARM LENGTH
MEM WX !
RF GAIN DELTA TUNE
MIN MAX
SET CLOCK
MEM SCAN
ALARM CLOCK
SET COUNT DOWN
MEM WX !
RF GAIN DELTA TUNE
NB/ANL
NB/ANL
S/ RF
MIN MAX
SWR /CAL
VOL
SET KEY TONES
OFF
ON
OFF
MEM WX !
NB /ANL
NB/ANL
RF GAIN DELTA TUNE ANL
S/ RF
S/RF
SWR
SWR/CAL
18
MIN MAX
VOL
Radio Check Mode
Allows testing of important radio functions. Press Menu/
Enter knob and select RADIO CHECK.
Press Menu/Enter to select 1st test, 2nd test and 3rd test.
CH 9/
SCAN
19
Test 1- Battery Level: Confirms that battery voltage level is
MEM SCAN
between 10.8 V to 15.8 V. If in that range, it is "PASS". Outside
of that range, either "FAIL LOW" or "FAIL HIGH" will be dis-
ESC
played. Press Menu/Enter knob to advance to next test.
1
SWR
T BACK
CAL
2
OFF
Test 2- RF Power Output: Confirms a 3.3 to 4 Watt output
CH 9/
SCAN
19
level. Once the Push-to-Talk button is pressed, Pass or Fail
will be displayed if the level is outside the limits.
1
ESC
SWR
T BACK
CAL
NB/ANL
2
2 3
1.5 NB/ANL RF POWER OUTPUT 1.5
SWR CAL SWR
TX
ANL ANL
RX PASS
S/RF
S/RF
S/RF RF RF
SWR SWR
OFF
CAL CAL
5 7 9
3
1 1
SIG +30dB SIG
SWR /CAL MEM
Test 3- Antenna Mismatch Warning: Press the
SQ DYNAMIKE VOL SQ
Push-to-Talk button to check for proper matching.
CH 9/ 1
SCAN
19
MIN OFF MIN
MEM SCAN
ESC
NB/ANL
2
2 3
1.5 ANTENNA 1.5
CAL NB/ANL
SWR TX SWR
SWR
T BACK ANL
CAL
RX PASS
S/ RF
S/RF
RF RF
SWR
CAL CAL
3 5 7 9
1 1
SIG +30dB SIG
SWR /CAL MEM
OFF VOL SQ
SQ DYNAMIKE
3
CH 9/
3
2 3 SCAN RF POWER OUTPUT
CAL 19
TX
RX MEM SCAN FAIL
3 5 7 9 ESC
+30dB
WX ! MEM WX !
SWR
DYNAMIKE RF GAIN DELTA TUNE T BACK RF GAIN
CAL
PRESS PTT
MIN MAX
MIN MAX OFF
TO CHECK
ANTENNA
CH 9/
3
2 3 SCAN
ANTENNA
CAL
TX 19
MEM SCAN
RX FAIL
3 5 7 9 ESC
+30dB
WX ! MEM WX !
SWR
DYNAMIKE RF GAIN
RF GAIN DELTA TUNE T BACK
CAL
Operation
Note
Use Dim/Escape button to
exit and return to CB standby
mode. If 10 seconds pass or if
Enter button pressed, unit goes
to 2nd test.
Note
Press Push-To-Talk within 10
seconds or unit will go to the
next test.
Note
Use Dim/Escape button to exit
and return to CB standby mode.
If 10 seconds pass or if Enter but-
ton pressed, go to 3rd test.
CH 9/
SCAN
19
MEM SCAN
Note
ESC
If 10 seconds pass or if Enter
button pressed, testing is
SWR
DELTA TUNE T BACK
CAL
complete. Unit will return to
CB Standby mode.
OFF
CH 9/
SCAN
19
MEM SCAN
ESC
19 SWR
DELTA TUNE
T BACK
CAL