Chapter 3
Installing the Router
Reinstalling Cards in the Line Card and RP Card Cage
Step 1
OL-11496-01
Before you begin reinstalling cards in the card cage, identify slot assignments by
referring to the written list you prepared when you removed the cards (refer to
Figure 3-8 on page 3-14
Use the following procedure to reinstall cards in the line card and RP card cage.
Starting at slot 0
(Figure
Slide the card into the slot until it mates with the backplane connector.
b.
a.
Tighten the captive screws at the top and bottom of the front panel.
Figure 3-26 Installing a Line Card into the Line Card and RP Card Cage
ALARM A
ALARM B
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
for slot-numbering).
3-26):
MBUS
CSC
SFC
A
ALARM A
B
FAIL
ALARM B
ENABLE
A
B
0
1
0
1
2
3
4
Reinstalling Cards in the Chassis
3-35