Chapter 3
Installing the Router
Step 2
Reinstalling Cards in the Chassis
Reinstalling Cards in the Switch Fabric and Alarm Card Cage
Step 1
OL-11496-01
Go to the
"Reinstalling Cards in the Switch Fabric and Alarm Card Cage" section
on page 3-33
to reinstall SFCS cards.
This section describes how to reinstall various line cards back into the chassis.
Use the following procedure to reinstall cards into the switch fabric and alarm
card cage (refer to
Figure 3-8 on page 3-14
Loosen the two captive screws on each side of the air filter door and swing the
door away from the switch fabric and alarm card cage
Figure 3-24 Opening the Air Filter Door
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
Reinstalling Cards in the Chassis
for slot numbering).
(Figure
3-24).
3-33