Cisco TelePresence SX10 Quick Set
Introduction
Network [1] VLAN Voice Mode
Define the VLAN voice mode. The VLAN Voice Mode will be set to Auto automatically if you
have Cisco UCM (Cisco Unified Communications Manager) as provisioning infrastructure.
Note that Auto mode will NOT work if the NetworkServices CDP Mode setting is Off.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Manual/Off
Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If
CDP is not available, VLAN is not enabled.
Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If
CDP is available, the manually set value will be overruled by the value assigned by CDP.
Off: VLAN is not enabled.
Network [1] VLAN Voice VlanId
Define the VLAN voice ID. This setting will only take effect if Network VLAN Voice Mode is
set to Manual.
Requires user role: ADMIN
Default value: 1
Value space: Integer (1..4094)
Set the VLAN voice ID.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration
Peripherals
Maintenance
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
84
Administrator Guide
System settings
System settings
Appendices