Choose Ringtone - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Choose ringtone

Sign in to the web interface, and navigate to
Personalization.
Change the ringtone
1. Choose a ringtone from the
drop-down list.
2. Click Save to make it the
active ringtone.
Set the ringtone volume
Use the slide bar to adjust the
ringtone volume.
D15330.02 SX10 Administrator Guide CE8.1, APRIL 2016.
Configuration Configuration Peripherals
Setup >
Maintenance
Play back the ringtone
Click the play button ( ► ) to
play back the ringtone.
Use the stop button (  ) to
end the playback.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
42
Administrator Guide
System settings Appendices
About ringtones
A set of ringtones are installed on the
video system. You should use the web
interface to chose a ringtone, and set the
ringtone volume.
You can play back the chosen ringtone
from the web interface. Note that the
ringtone will be played back on the video
system itself, and not on the computer
running the web interface.