Cisco telepresence SX20 quick set Setup Manual page 4

3
Choose provisioning infra-
structure.
If you choose [Advanced setup],
the device skips registration to a
call service, and you must reg-
ister the system from the sys-
tem s web interface. Skip to
3
4
If you choose [CUCM], en-
ter the required informa-
tion.
5
Select [Apply] and skip to
5
.
Contact your Cisco Unified
Communications Manager
4
(UCM) administrator to get the
information needed.
6
If you choose [Edge], enter
the required information.
7
Select [Apply] and skip to
.
7
Contact your Cisco Unified
Communications Manager
(UCM) administrator to get the
6
information needed.
.
10
3 Using Setup Assistant
8
If you choose [Edge], enter
the required information.
9
Select [Apply].
Contact your VCS provider to
9
get the information needed.
8
10
Select [Change Timezone]
and set your region, time
zone, and time format.
11
Select [Confirm].
11
12
Set the screen resolution
according to what your
screen supports.
If your screen is black or flick-
ering, you can set the resolution
13
to a lower setting. Only the set-
tings supported by your screen
are available are selectable on
12
the setup assistant.
13
Select [Confirm].
Cisco TelePresence SX20 Quick Set Easy Setup Guide