Using Setup Assistant - Cisco telepresence SX20 quick set Setup Manual

2
Using TRC6 Remote Control
When you pick up the remote control, the system wakes up.
Use the [Cursor] controls to move about the screen and press [OK/Enter] to open
the selected menu field. Use the [Cancel] key to exit a menu (and return to the
Home screen) undoing any changes. Use the [Back] key to go just one step back.
Make sure the remote control has working batteries (2 x AAA batteries).
Volume control and
Increase/Decrease control
Field selector/
Cursor keys
Go back one step
Place call /
Accept incoming call
1
.@
4
ghi
Keypad
7
pqrs
*
OK/Enter
Microphone
mute/unmute
Reject incoming call /
End call / Cancel /
2 3 Back to Home
abc def
screen (outside calls)
5 6
jkl mno
8 9
tuv wxyz
0 #
3

Using Setup Assistant

When you start the system for the first time, the setup assistant starts automatically.
Navigate through the setup with either a remote control or from the touch touch
controller.
2
MEMO
This guide doesn t cover information on Cisco Spark registered systems. For more information
on Cisco Spark room systems, visit:
https://help.webex.com/community/cisco-cloud-collab-mgmt
3 Using Setup Assistant
1
Select [Get started].
1
2
Select [Other services].
If your system is automatically
provisioned, the IP and provi-
sioning settings are automati-
cally configured and the setup
assistant skips these steps. Skip
to .
Cisco TelePresence SX20 Quick Set Easy Setup Guide