MONITOR screen (Monitor field in Surround mode)
If you set a bus to Surround mode in BUS SETUP, the Monitor field in the MONITOR screen
appears as shown below.
2
3
1
1
SURROUND MONITOR display button
When you press this button, the SURROUND MONITOR window will appear, in which
you can make detailed surround monitor settings.
2
SOURCE SELECT field
Selects the surround monitor source. If 2CH MONITOR has been selected in this field,
use the SURROUND MONITOR window to specify the source channel.
3
Speaker Mute field
You can individually mute each speaker that is monitored.
4
DOWNMIX field
Select in which field to perform downmixes.
• STEREO button
Downmix in stereo mode.
• MONO button
Downmix in mono mode.
5
Meter field
Shows the meters for the surround signal being monitored. The layout of the meters is
the same as the layout set in the SURROUND SETUP screen.
4
5
SURROUND MONITOR window (Surround mode)
You can make detailed settings for surround monitoring. If Surround mode is set for the bus
settings in BUS SETUP, this window appears when you press the MONITOR display button
or meter field in the MONITOR screen.
2
1
1
SOURCE SELECT field
Select one of the following as the surround source that will be output to the MONITOR
bus.
MIX1-6
Surround signals in the current mix
EXT5.1-1-3
Surround signals set in MONITOR SOURCE SETUP (3 channels)
2CH MONITOR
Stereo signals set in MONITOR SOURCE SETUP
2
MONITOR SOURCE SETUP button
Use this button to open the MONITOR SOURCE SETUP screen. Set the sources and
names for EXT 5.1 - 1-3 (EXTERNAL SURROUND) and EXT ST - 1-4 (EXTERNAL STEREO).
107
Monitor and Cue functions
3
4
5
6
7
Reference Manual