Connecting The Cisco Asr 903 Router To The Network - Cisco ASR 903 Installing Manual

Installing Dust Caps
Installing Dust Caps
The following list provides the product IDs (PIDs) for the dust caps that are available for each port type:
• RJ-45—A900-DCAP-RJ45-S= (24 dust caps per package) or A900-DCAP-RJ45-L= (240 caps per
• SFP—A900-DCAP-SFP-S= (24 caps per package) or A900-DCAP-SFP-L= (240 caps per package)
• USB—A900-DCAP-USB-S= (12 dust caps per package) or A900-DCAP-USB-L= (120 dust caps per
• XFP/QSFP—A900-DCAP-XFP-S= (12 dust caps per package) or A900-DCAP-XFP-L= (120 dust caps
Figure 30: Dust Cap
1
To install the dust cap:
1 Hold the dust cap by its handle.
2 Insert the dust cap in to the appropriate unused ports (RJ-45, SFP, USB, or XFP/QSFP) on the chassis
front panel.

Connecting the Cisco ASR 903 Router to the Network

When installing the cabling to the RSPs, we recommend that you leave a service loop of extra cabling
Note
sufficient to allow for fan tray removal.
Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide
44
package)
package)
per package)
Dust cap
Installing the Cisco ASR 903 Router
—