System Switchover - Cisco Nexus 7000 Reference

system switchover

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
system switchover
To switch over to the standby supervisor, use the system switchover command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
Release
Command History
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to switch over to the standby supervisor:
switch# system switchover
switch#
Related Commands Command
show system redundancy Displays the system redundancy status.
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
HACR-22
system switchover
Modification
This command was introduced.
Description
Cisco Nexus 7000 Series NX-OS High Availability Commands
OL-23374-01