System Standby Manual-Boot - Cisco Nexus 7000 Reference

Cisco Nexus 7000 Series NX-OS High Availability Commands
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m

system standby manual-boot

To enable the system standby manual boot, use the system standby manual-boot command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to enable the system standby manual boot:
switch(config)# system standby manual-boot
system standby manual-boot option is enabled
switch(config)#
Related Commands Command
system hap-reset
OL-23374-01
system standby manual-boot
Modification
This command was introduced.
Description
Enables the Supervisor Reset HA policy.
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
system standby manual-boot
HACR-21