Table of Contents
Advertisement
Doc Title
:
User's Guide
Model
:
Motorola L70×CBT
․
If the phonebook capacity is full during the transferring process, the phonebook transfer will be ended
automatically. The corded base will display MEMORY FULL, and then #### PB RECEIVED (#### refers to the
total number of entries downloaded successfully).
4
USING YOUR PHONE
4.1 Making a home call using your landline
1. Enter the phone number and pick up the corded handset or press <HOME/SPEAKER> on corded base to dial
the phone number.
4.2 Making a cellular call using your corded base phone
If there is only one Bluetooth enabled mobile phone paired up and connected,
1. Enter the phone number, and then press <CELL> to dial out.
If there are two Bluetooth enabled mobile phones paired up and connected,
1. Enter the phone number, press <CELL> and then <+/-> to select the desired cellular device.
2. Press <MENU> or <CELL> to dial out.
NOTE
If the cellular device is paired up but not connected, you should connect the cellular device before making an
external cellular call.
4.3 Speed dial calling
1. In idle mode, press and hold a key from <1> to <9> until the number is displayed and dialed.
4.4 Answering a home call
1. Pick up the corded handset or press <HOME/SPEAKER> on corded base to answer the incoming home call.
4.5 Answering a cellular call
1. Pick up the corded handset or press <CELL> on the corded base to answer the incoming cellular call.
4.6 Receiving a cellular call while on a home call
A short beep during a HOME call indicates that there is an incoming CELLULAR call and the screen will display the
caller ID.
To answer the incoming cellular call:
․
Press <CELL> on the corded base. The home call will be placed on hold automatically and CELL IN USE and
HOME ON HOLD will display on the screen alternately.
To swap the line to a home call:
․
While talking on a cellular call, press<HOME/SPEAKER> on the corded base to swap to the home call. The
cellular call will be placed on hold automatically and HOME IN LINE and CELL ON HOLD will display on the
screen alternately.
To end the cellular call:
․
Put the corded handset on the corded base cradle.
4.7 Receiving a home call while on a cellular call
A short beep during a CELLULAR call indicates that there is an incoming HOME call and the screen will display
the caller ID.
To answer the incoming home call:
․
Press <HOME/SPEAKER> on the corded base. The cellular line call will be placed on hold automatically and
HOME IN LINE and CELL ON HOLD will display on the screen alternately.
To swap the line to a cellular call:
․
While talking on a home call, press<CELL> on the corded base to swap to the cellular call. The home call will be
placed on hold automatically and CELL IN USE and HOME ON HOLD will display on the screen alternately.
To end the home call:
․
Put the corded handset on the corded base cradle.
4.8 Conference home and cellular calls
When you have calls established on the home and cellular lines, you can create a 3-way conference call.
To conference both home and cellular line calls:
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
18 of 40
Advertisement
Table of Contents
