Panasonic FP0R User Manual page 274

WR902 FP0R
Relay No. Name
R9020 RUN mode flag
R9021 Not used
R9022 Not used
R9023 Not used
R9024 Not used
R9025 Not used
R9026 Message flag
R9027 Not used
R9028 Not used
R9029 Forcing flag
Interrupt enable
R902A
flag
Interrupt error
R902B
flag
R902C Sample point flag
Sampling trace
R902D
end flag
Sampling stop
R902E
trigger flag
Sampling enable
R902F
flag
A: Available, N/A: Not available
15-12
Turns off while the mode selector is set to PROG.
Turns on while the mode selector is set to RUN.
Turns on while the F149 (MSG) instruction is executed.
Turns on during forced on/off operation for input/output relay
timer/counter contacts.
Turns on while the external interrupt trigger is enabled by the ICTL
instruction.
Turns on when an interrupt error occurs.
Sampling by the instruction=0
Sampling at constant time intervals=1
When the sampling operation stops=1,
When the sampling operation starts=0
When the sampling stop trigger activates=1
When the sampling stop trigger stops=0
When sampling starts=1
When sampling stops=0
Description