Honeywell UDC3500 Instruction page 6

Replacement Instruction,
Chassis Reassembly
There are four slots cut in the Bezel which fit four tabs on the Display / Keyboard. Place the bottom of the
Display / Keyboard into the bottom chassis slots and press the top of the display in until it snaps into place in
the top chassis slots.
4 Slots
Chassis Reassembly
The P15 connector on the Optional Relay board plugs into J15 on the Power/Output board. Insert
these boards as an assembly into the Chassis. Start them in the chassis groves and carefully push
them in until they snap into place.
P15
J15
6
Continued
Figure 7 Display / Keyboard
Figure 8 Optional Relay and Power/Output Board
Kit Instruction 51-52-33-153
Tabs
Bottom of Display
Top of Display
Continued on next page
01/06