Samsung OfficeServ 7200 Programming Manual page 97

CHAPTER 2. MMC Programming
[224] WAKE-UP ANNOUNCEMENT
This MMC is an enhanced Wake Up feature. The system will play a recorded message
when a Wake Up call is answered by the user. The Wake Up Announcement feature re-
quires an SVMi-20 card to be installed in the system. When a Wake Up call is answered,
the system will access the customized Wake Up message (1-48) recorded in the card. The
end user can record this message and also change it if desired. The Wake Up message will
have no default ROM message assigned to it; however, a ROM message(49-64) may also
be assigned as the Wake Up message if desired.
This MMC has three options.
No
0 AA GROUP
1 MESSAGE NO
2 GROUP BUSY
CONDITIONS
NONE
DEFAULT DATA
AA GROUP: NONE
MESSAGE NO: NONE
GROUP BUSY: NONE
ACTION
1. Press Transfer button and enter 224.
Display shows:
2. Dial 0, 1 or 2 for option select.
OR
Press Volume button to select option and press
Right Soft button.
Samsung Business Communications
Option
Determines which AA group will be connected when a Wake Up
call is answered. This destination can be any AA group.
Determines which message will be played when a Wake Up call is
answered. This destination can be a custom recorded message
(1-48) or one of the pre-programmed messages (49-64).
Determines which tone source will be connected when all AA group
members are busy. This destination can be NONE, TONE or external
music on hold.
If NONE is set then dial tone is connected; if TONE is set then hold tone
is connected.
OfficServ 7200 Programming Guide
Description
DISPLAY
WAKE-UP ANNOUNCE
AA GROUP :NONE
WAKE-UP ANNOUNCE
AA GROUP :NONE
2-66