Samsung OfficeServ 7200 Programming Manual page 324

CHAPTER 2. MMC Programming
[820] ASSIGN SYSTEM LINK ID
This MMC is used to assign the system link ID for PRI and VoIP networking. Up to 100
link IDs can be entered including SELF ID. In addition, each Link ID is associated with the
IP address and IP address type of the MCP card for that system.
Option
LINK ID
SIGNAL G/W
IP TYPE
CONDITIONS
'SELF' represents self-node, and must be set to use the networking function. Items other
than 'SELF' are used for station numbers and can be omitted.
DEFAULT DATA
NONE
ACTION
1. Press Transfer button and enter 820.
Display shows:
2. Enter SELF link ID via dial keypad and
press Right Soft button.
3. Press Volume button to select other link ID
and press Right Soft button to mover cursor.
4. Enter other link ID via dial keypad and
press Right Soft button.
5. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
RELATED ITEMS
MMC 821
MMC 823
MMC 824
MMC 830
Samsung Business Communications
System ID for networking feature.
System IP address for VoIP networking
System IP address type for VoIP networking. SELF system IP address type
determines 'SYSTEM IP TYPE' in MMC 830.
ASSIGN NETWORK TRUNK
ASSIGN NETWORK COS
NETWORK DIAL TRANSLATION
ETHERNET PARAMETERS
OfficServ 7200 Programming Guide
Description
DISPLAY
SELF :LINK ID
SELF :LINK ID
11
SYS01:LINK ID
SYS01:LINK ID
22
2-293